Tealwash hand wash unit for motor vehicles.
The robust and easy-to-clean TEALwash portable sinks are the perfect solutions for motor vehicles – for hand washing on the move!
The Standard TW12 unit requires no switch, with fully automatic control providing battery safety piece of mind. The TEALwash is E-marked to meet European EMC Automotive Directive 95/54/EC.
Real hand hygiene is achieved under hot running water at the ideal constant temperature of 45°C +/-2°C. There are no messy twist taps to retain dirt and grease – just a simple Flipi-tap.
Simply place a suitable container (not supplied) underneath the blue outlet pipe (see image above) on the TEALwash to collect the wastewater during hand washing.
The TEALwash provides more than twenty twelve second washes, from each filling of the 5 litre water tank. And it’s easy to fill and empty with a large opening lid for a quick top-up with clean water. Close the bowl after washing and the waste water drains away.
Standard unit: voltage sensing
These units incorporate voltage sensing technology. This means that the unit will automatically switch on and off when the vehicle itself is turned on and off.
Standard TW12
- When the vehicle is turned off, the battery state is quiescent at 12V.
- When switched on, the alternator will raise the battery output to 14-14.5V.
- The software in the TealWash will see this rise and switch the unit on when 13.8 volts is detected. The TealWash will then continue to work until the vehicle is switched off and the unit will see the battery output drop back to 12V, cutting out out at 12.8V.
- The battery will not be therefore be drained by the TealWash.
Therefore a switch or relay must be introduced between the battery and the TealWash, enabling it to be switched off either manually or automatically.
The choice of switches or relays is down to customer preference.
Hand Wash Unit | |
Hand Wash Heating Type | Heated |
Hand Wash Voltage | 12v |
Hand Wash Drainage | External Drain |